Sangoma A20001D 2 FXO analog card w/ EC HW - PCI

  • Model: A20001D
  • UPC: 617375769472
  • Shipping Weight: 1lbs
  • Manufactured by: Sangoma

Login/Create an Account to see special price.

Model: A20001D KIT    
What's Included in this Kit
Base + Remora 1x PCI
Additional Remora 0  
Backplane No  
FXS (Dual) 0 0 FXS Lines
FXO (Dual) 1 2 FXO Lines
Echo Module Yes  
RJ11 Cable 4  
Low Profile Bracket Included
This is a KIT, depending on your order, items may come pre-assembled or may require some assembly (putting the A200/A400 parts together)

SUPPLIED SANGOMA PHOTO SHOWING the A200 Series Card with FXO and FXS Module.
The ACTUAL ITEM that you will receive is the MODEL NUMBER as indicated in the title of this listing.

Sangoma A20001D

2 FXO analog card w/ EC HW

Expandable to 24 Ports in 2U Form Factor

Sangomaâ??s A200 4 port FXO/FXS card delivers superior audio quality and is expandable to 24 ports in a 2U form factor.

As you need them, additional REMORA? cards can be added to the base four-port A200 card. A single PCI or PCI Express slot hosts connection for up to 24 ports and ensures common synchronous clocking for all channels.

The A200 AFT architecture is shared with Sangomaâ??s A101, A102, A104 and A108 cards ensuring common 3.3 V or 5 V, high performance and universal PCI or PCI Express compatibility.

Like all the Sangoma AFT Series, the A200 and RemoraTM system has field upgradeable firmware to take advantage of enhancements as they become available.

Sangoma cards guarantee error-free faxing and click-free audio on analogâ?“digital links.*

*Hardware echo cancellation option required

Technical Specifications

  • From 2 to 24 ports supported, mixing FXO and FXS interfaces, as required
  • Support for the Asterisk, FreeSWITCH, Yate, CallWeaver, PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications
  • Single synchronous PCI and PCI Express interface for all 24 FXO/FXS ports
  • Four RJ11 ports per Remora card
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis
  • Short 2U compatible mounting clips available for installation in 2U rack-mount servers
  • 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention
  • Autosense compatibility with 5 V and 3.3 V PCI busses
  • Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features can be added when they become available
  • Maximum operational power for PCI: 3.75 W (0.75 A @ 5 V) + 4.2 W (0.35 A @ 12 V) per FXS module
  • For PCI Express: 2.64 W (0.8 A @ 3.3 V) + 4.2 W (0.35 A @ 12 V) per FXS module
  • Temperature range: 0 â?“ 50°C
  • Shipped with standard RJ11-terminated cables

Get the Fax on Sangoma Hardware

  • With Sangoma, there is no need for a separate analog line to run your fax machine
  • Using T1/E1 passthrough with Sangoma analog boards, there are no clock slips, buffer overruns, or transmit underruns that cause missed lines, blank sheets, and missed pages when faxing
  • Sangoma A200 and A400 boards synchronize perfectly with digital T1/E1 boards and the PSTN atomic clock for error-free fax and modem passthrough and superior voice quality over T1 and E1 lines

Optional DSP Echo Canceller Daughterboard on the A200D

  • G.168-2002 echo cancellation in hardware
  • 1024 taps/128ms tail per channel on all channel densities
  • DTMF decoding and tone recognition
  • Voice quality enhancement: music protection, acoustic echo control and adaptive noise reduction
  • No CPU load as a result of echo cancellation
  • Does not increase the physical size of the card, and no additional slot is required

Wiring Connections

  • The A200 and Remora cards incorporate 4-pin RJ11/4 narrow jacks, such as those used in telephone handsets
  • Each Sangoma A200 board is shipped with four 2 m cables terminating in a narrow RJ11/4 plug at one end and a telephone-standard RJ11/6 plug at the other
  • To hardwire the A200 system, you can purchase a kit of 12 RJ11/4 plugs and a crimping tool, sold separately

Operating Systems

  • Windows 2003, Windows XP, Windows Server 2008, Windows Vista, Windows 7
  • Linux (all versions, releases and distributions from 1.0 up)


  • FCC Part 15 Class A, FCC Part 68, and EN 55022 Class A, JATE
  • Technical certifications in Russia and Malaysia

Diagnostic Tools

  • WANPIPEMON, SNMP, system logs


  • The A200 consists of a Remora daughterboard mounted on the AFT PCI board. The Remora board has two sockets each of which can accept a FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines, respectively.
  • Up to five additional Remora daughterboards can be mounted in empty slot positions beside the A200 assembly, connected to the A200 by a backplane bus connector.

Production Quality

  • ISO 9002


  • Lifetime warranty on parts and labour when purchased through an authorized Empowered by Sangoma Channel Partner.

Additional Images

Add to Cart:

Your IP Address is:
wabusiness template