Sangoma A20001E 2 FXO analog card - PCIe

  • Model: A20001E
  • UPC: 617375769465
  • Shipping Weight: 1lbs
  • Manufactured by: Sangoma

Login/Create an Account to see special price.
$272.00

Model: A20001E KIT    
What's Included in this Kit
Base + Remora 1x PCI
Additional Remora 0  
Backplane No  
FXS (Dual) 0 0 FXS Lines
FXO (Dual) 1 2 FXO Lines
Echo Module No  
RJ11 Cable 4  
Low Profile Bracket Included
This is a KIT, depending on your order, items may come pre-assembled or may require some assembly (putting the A200/A400 parts together)

SUPPLIED SANGOMA PHOTO SHOWING the A200 Series Card with FXO and FXS Module.
This is for ILLUSTRATION PURPOSES and is NOT THE ACTUAL ITEM.
The ACTUAL ITEM that you will receive is the MODEL NUMBER as indicated in the title of this listing.

A20001E
2 FXO analog card PCI Express

Expandable to 24 Ports in 2U Form Factor

Sangomaâ??s A200 4 port FXO/FXS card delivers superior audio quality and is expandable to 24 ports in a 2U form factor.

As you need them, additional REMORA? cards can be added to the base four-port A200 card. A single PCI or PCI Express slot hosts connection for up to 24 ports and ensures common synchronous clocking for all channels.

The A200 AFT architecture is shared with Sangomaâ??s A101, A102, A104 and A108 cards ensuring common 3.3 V or 5 V, high performance and universal PCI or PCI Express compatibility.
Like all the Sangoma AFT Series, the A200 and RemoraTM system has field upgradeable firmware to take advantage of enhancements as they become available.

Sangoma cards guarantee error-free faxing and click-free audio on analogâ?â??digital links.*

*Hardware echo cancellation option required

Technical specifications
 
Optional DSP Echo Canceller Daughterboard on the A200D

The A200 and Remora? cards incorporate four, 4-pin RJ11 narrow jacks, such as used in telephone handsets. Each Sangoma A200 Card is shipped with four 2m cables terminating in a narrow RJ11/4 plug at one end and a telephone-standard RJ11/6 plug at the other.

For those who need to hard wire the A200 system, you can purchase a kit of 12 RJ11/4 plugs and a crimping tool, sold separately.

Get the Fax on Sangoma Hardware

With Sangoma, there is no need for a separate analog line to run your fax machine.

Using T1/E1 passthrough with Sangoma analog cards, there are no clock slips, buffer overruns, or transmit underruns that cause missed lines, blank sheets, and missed pages when faxing.

Sangoma A200 and A400 cards synchronize perfectly with digital T1/E1 cards and the PSTN atomic clock for error-free fax and modem passthrough and superior voice quality over T1 and E1 lines.*

*Hardware echo cancellation option required.

Warranty
 Five years parts and labour.
 
 Certification

 FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class A, CIPSR 24, AFIC-S016, IEC 60950. Technical certifications in Russia, Malaysia and Australia
 
 Architecture

The A200 consists of a Remora? daughterboard mounted on the AFT PCI card. The Remora card has two sockets each which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines respectively.

Up to five additional Remora? daughterboards can be mounted in empty slot positions beside the A200 assembly, connected to the A200 by a backplane bus connector.

Stock Photo used shows FXS and FXO Modules installed.
(FXS module is Green, FXO module is Red)
The actual item will consist of the A200 Base with the Remora plus the actual number of FXO or FXS Port you ordered.


Add to Cart:



Your IP Address is: 3.236.50.252
wabusiness template