Quad Span T1 E1 J1 PRI PCI-E Card (Low Profile Advanced Version)

  • Model: D430E
  • UPC: 617375763913
  • Shipping Weight: 2lbs
  • Manufactured by: OpenVox

Login/Create an Account to see special price.
$934.15

Product Spotlight
OpenVox D430E is now the leading 4 port T1/E1/J1 PCI-E card in the open source industry. It supports up to 128 channels in E1 mode or 96 channels in T1/J1 modes.

    Industry 1st adjustable interrupt routing design
    Interrupts frequency adjustment
    Compatible with All Commercially Available Motherboards
    Four T1/E1/J1 ports with PCI-E interface for high performance voice and data applications
    3-Month "No Questions Asked" Return Policy
    Lifetime warranty

Overview
The D430E is an upgrade product of the D410E. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. D430E is supposed to be the most advanced 4 port T1/E1/J1 asterisk® card with superior quality in the open source community. The leading innovation ensures users to adjust the interrupts frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict.

    D430E supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

    D430E works with Asterisk®, Elastix®, FreeSWITCH®, PBX in a Flash, trixbox®, Yate® and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

Target Applications
    Voice-over Internet Protocol (VoIP) Services
    Complex IVR Trees
    "Meet-Me" Bridge Conferencing
    Calling Card Platforms
    VoIP Gateways (support SIP, H.323, and IAX)
    Legacy PBX/IVR Services
    Voice/Data Router (replace expensive routers)
    PRI/Switch Compatibility - Network or CPE

Technical Specifications
    Four T1/E1/J1 ports with PCI interface for high performance voice and data applications
    Half-length PRI card
    RJ48 connector
    Low profile option
    FPGA design, upgradeable firmware onsite
    Power: 2.6W Minimum, 3.9W Maximum at 3.3 V or 5 V.
    Operation temperature: 0°C to 50°C
    Storage temperature: -65°C to 125°C
    Dimension: 2U Form factor: 12*6.4*1.8cm
    Weight: 300g

PRI Switch Compatibility
    EuroISDN (PRI or PRA) - Q.931/Q.921
    Network or CPE
    AT&T 4ESS
    National ISDN 2
    CAS Voice Modes
    DMS 100
    Lucent 5E

Operating Systems
    Linux (all versions, releases and distributions f rom 1.0 up)
    Minimum Hardware Requirement
    800-Mhz Pentium III
    128MB RAM
    Available PCI-E Slot

D430E


Add to Cart:



Your IP Address is: 35.172.164.32
wabusiness template