8 Port T1/E1/J1 PRI PCI-E card (Low Profile Advanced Version)

  • Model: D830E
  • UPC: 617375767324
  • Shipping Weight: 2lbs
  • Manufactured by: OpenVox

Login/Create an Account to see special price.
$1,359.15

Product Spotlight
OpenVox D830E is now the leading 8 port T1/E1/J1 PCI-E card in the open source industry. It supports up to 256 channels in E1 mode or 192 channels in T1/J1 modes.

    Industry 1st adjustable interrupt routing design
    Interrupts frequency adjustment
    Compatible with All Commercially Available Motherboards
    Eight T1/E1/J1 ports with PCI-E interface for high performance voice and data applications
    3-Month "No Questions Asked" Return Policy
    Lifetime warranty

Overview
The D830E supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. D830E is supposed to be the most advanced 8 port T1/E1/J1 asterisk® card with superior quality in the open source community. The leading innovation ensures users to adjust the interrupts frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict.

D830E supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

D830E works with Asterisk®, Elastix®, FreeSWITCH®, PBX in a Flash, trixbox®, Yate® and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

Target Applications
    Voice-over Internet Protocol (VoIP) Services
    Complex IVR Trees
    "Meet-Me" Bridge Conferencing
    Calling Card Platforms
    VoIP Gateways (support SIP, H.323, and IAX)
    Legacy PBX/IVR Services
    Voice/Data Router (replace expensive routers)
    PRI/Switch Compatibility - Network or CPE

Technical Specifications
    Eight T1/E1/J1 ports
    Half-length PRI card
    RJ48 connector
    Low profile option
    FPGA design, upgradeable firmware onsite
    Power: 3.6W Minimum, 4.9W Maximum at 3.3 V or 5 V.
    Operation temperature: 0°C to 50°C
    Storage temperature: -40°C to 125°C
    Dimension: 2U Form factor: 12*6.4*1.8cm
    Weight: 107g
    PRI Switch Compatibility
    EuroISDN (PRI or PRA) - Q.931/Q.921
    Network or CPE
    AT&T 4ESS
    National ISDN 2
    CAS Voice Modes
    DMS 100
    Lucent 5E

Certification
    FCC Part 15, FCC Part 68, CE(EN55022, EN55024),CS-03 and RoHS Compliant

Operating Systems
    Linux (all versions, releases and distributions from 1.0 up)

Minimum Hardware Requirement
    800-Mhz Pentium III
    128MB RAM
    Available PCI-E Slot

Datasheet
    DE830P_series_Card_Datasheet.pdf
    DE830P_Series_Card_Datasheet_CN.pdf
    Online User Manual
    D830E_on_DAHDI_User_Manual.pdf
    D830E_on_DAHDI_Chinese_User_Manual.pdf

D830E


Add to Cart:



Your IP Address is: 34.225.194.102
wabusiness template